 |
|
Keyword Search:
"MotionShop.com" and "The Motion Control Home Page" are trademarks of E-Media Publishing. Other product and company names are trademarks or registered trademarks of their respective holders. Copyright © 2009 |
| New The World´s Most Advanced Motion Control Stepper Motor Controller up to 9 Amp and 80 VDC - SMC85!
State of the art technology with the highest microstepping resolution in the industry
Birkerød, Denmark and Morrow, OH (USA) -- JVL now launches a new stepper motor controller with RS485 and CANopen serial interface and programmable motion controller. All the necessary electronics in a stepper system are integrated in the motor itself. JVL has used the newest technology to obtain an incredibly high step resolution of 819200 step/revolution – resulting in unsurpassed smoothness and silent running. • The driver MOSFETs are so efficient that no heat sink is needed up to 6A . Supply voltage can be in the range of 12 to 80 VDC and running current up to 9A RMS and 12.6A peak. A 32 bit ARM microprocessor and powerful FPGA take care of the extremely precise velocity, acceleration and step resolution that have newer been seen before in the industry. • The controller contains everything needed to solve a modern control task as stand-alone or controlled from a PLC or PC. 8 I/O points can be individually configured to digital input, digital output or analogue input. Modbus RTU and CANopen provide easy connections to a PLC or HMI. An ActiveX/OCX driver is available to make interfacing to LabView, Excel, VB or other Windows-programs simple. The MAC motor standard protocol enables MAC motors and QuickStep motors and SMC85 controllers to be connected on the same RS485 bus with up to 254 axes. • Extreme Resolution up to 819200 step/rev equal to 4096 microsteps per fullstep • Velocity precision 0.01 RPM. Acceleration precision 1 RPM/sec. • Built-in PLC with 8 I/O: each DI or DO 24V or 0-5V (12bit) analogue input with advanced input filtering • RS485 up to 921 kbit and Modbus RTU • Option: RS422 and RS485 for encoder I/O and connection to external HMI or PLC • Point-to-point or multi-axis operation up to 254 axes on the same RS485 bus • CANbus with CANopen DSP402 and DS301 • Option: Pulse/Direction mode for electronic gearing • Prepared for High speed position capture • Wide Supply range from 12-80 VDC delivering high torque at high speed • Motor current 0-9 Amp RMS, 12.6 Amp Peak • Dual supply maintain position values etc in emergency-stop situations • ActiveX / OCX driver available as well as MacTalk protocol • Option for box with M12 connectors and DIN rail mounting • Option for Interface for SSI absolute encoder • Powerful graphic programming with +-*/ calculations and advanced functions • The stepper motor controller can be delivered with wireless Bluetooth, ZigBee or WLAN. The controller is also prepared for future options like Profibus and Industrial Ethernet like EtherCAT and EtherNet/IP and absolute multi-turn encoder without external battery. • The PCB is also available mounted in an integrated stepper motor MIS 340-342 with torque from 3 to 9 Nm. PCB size is only 78x86 mm with 4 mounting holes so it can easily be mounted in an instrument or in a cabinet or directly in the rear end of a motor. Optionally it is delivered in a box with M12 connectors and DIN rail mounting. JVL’s web-site www.jvl.dk illustrates examples that make it even easier for users to begin programming their own applications. Also click here for additional information. United States: Further information can be obtained from: JVL International • Att: Mike Fisher • Motion & Control Sales Ltd. 8610 Morrow-Rossburg Rd • Morrow • OH 45152-9444 E-mail: mfisher@jvlusa.com • Tel.: 513/877-3134 •Tel.: 513/282-0888 (Tech Support Line) • Fax: 513/877-2471• www.jvlusa.com All Other Countries: Further information can be obtained from: JVL Industri Elektronik A/S Blorkken 42, DK 3460, Birkerød, Denmark E-mail: jvj@jvl.dk Tel.: +45 4582 4440 ; Fax.: +45 4582 5550 ; jvl.dk |
