 |
| A SAFE ENCLOSURE WITH EACH LOAD:
Lockable hinged-opening lids for the VERSATRAX series
| ||||||
Reliably with one click - Versatrax hinged-opening lids with additional interlock: 
for surging pressure hydraulic hoses
for tight bend radii
safe, interlocking hinged-opening lids
increased torsional rigidityAvailable for the type series 0345, 0455, 0555 and 0655. Cable & hose carrier systems are often used in applications that require the extra security provided by Versatrax lockable hinged opening lids. This particularly applies within two application areas:
Anywhere pressurized hydraulics, water, oil hoses/lines are used, conventional hinged opening lids can sooner or later fail due to the high pressure loads surging against the cavity lids. Versatrax interlocking hinged opening lids provide an ideal solution to stop this problem in many applications. Tight Bend Radius Sometimes an application's width demands a bend radius that is tighter than the cable or hose's recommended minimum bend radius. Although decreasing the carrier system's bend radius to be tighter than the cable it carries should always be a last ditch design alternative, Versatrax lockable hinged opening lids provide a significantly improved option for securely locking/holding your cables or hoses within the carrier system while at the same time offering the convenience and flexibility of a hinged opening lid system. |
||||||
 |
 |
 |
|
Interlock with type series 0345 |
Interlock with type series 0455 |
Interlock with type series 0555 and 0655 |
|
|
The
new interlock lids for the VERSATRAX series are
specifically designed to provide absolutely
secure enclosure. When closed, they are locked
tight, however, they can be easily opened
through a deliberate procedure in order to
perform maintenance or services on the cables or
hoses inside. Easily adding maintenance-free
horizontal and vertical partitioning is also a
snap due to the hinged opening cavity. A special slide lock mechanism completely closes around a connecting bar thus providing an exceptionally secure enclosure. This secure lock also significantly increases the torsional rigidity of the entire cable & hose carrier system. For additional information about Lockable Hinged-opening Lids for the VERSATRAX Series of cable and hose carrier systems, contact KabelSchlepp America, Inc. at 7100 West Marcia Rd, Milwaukee, WI 53223-3363 Tel: 414-354-1994, Fax 414-354-1900, or e-mail us at info@kabelschlepp.com and say, "I saw it in MotionShop.com" or visit our Web site at http://www.kabelschlepp.com.
Add Your Product/Company | Need a Website? | Need a Product Release? "MotionShop.com" and "The Motion Control Home Page" are trademarks of E-Media Publishing. Other product and company names are trademarks or registered trademarks of their respective holders. Copyright © 2005 E-Media PublishingL |
|||
|
Keyword Search: 
   |