SilverPak 23D Integrated Motor & Driver

New! SilverPak 23D Integrated Motor & Driver With Pole Damping Technology

Lin Step SilverPak Motor Santa Clara, CA -- Lin Engineering, the Step Motor Specialists, are pleased to introduce the new SilverPak 23D; an integrated NEMA 23, High Torque, 1.8° step motor and microstepping driver. The SilverPak 23D is designed to help reduce overall design time and system cost for a wide array of step motor application s needing high torque.

The SilverPak 23D is offered in three body lengths: 2.52”, 2.96” and 3.89”. Depending on its stack size, the integrated motor/ driver is capable of producing up to 210 oz-in of holding torque . The SilverPak 23D operates from 15 VDC to 48 VDC and the available phase current ranges from 0.3 Amps to 3 Amps peak. This integrated motor/driver combination boasts jumper configurable step resolutions ranging from 2x microstepping up to 256X microstepping and 4 selectable damping modes. The unit also features: optically isolated step, direction and disable/enable inputs; and under-voltage and over-temperature protection.

Pole Damping Technology™ (PDT) is yet another feature that the SilverPak 23D is capable of. Pole Damping Technology enhances step motor performance, thus creating a more accurate and smooth motion profile.

Below shows what Pole Damping™ Technology can do for your applications. Notice the spikes a competitor’s driver creates at every 64th step when running the motor at x microstepping

< Lin Step SilverPak chart

The R325 driver eliminates these spikes, resulting in smooth motion and even steps.

The spikes occur because of the step motor’s poles, forcefully being pulled towards each other. Pole Damping™ technology, as the name implies, dampens each step as it nears the full step positions where the poles are the strongest. When using a product with Pole Damping™ technology, the spikes are eliminated

Additional Information:

Integrated Motor: Silverpak 23D

Microstepping Driver: R325

Lin Engineering has earned the reputation as the technical leader in step motor design with the ability to “Maximize Torque at Desired Speed.”

Founded by Ted T. Lin in 1987, Lin Engineering began as a consulting company specializing in step motor applications. Throughout the company’s history, it has continued to develop its capabilities in the areas of design engineering, manufacturing and customer service. Lin Engineering has developed its product line to include drivers, optical encoders, power supplies, spur and planetary gearboxes, and integrated step motor drives.

For additional information, contact Lin Engineering at 1990 Russell Ave., Santa Clara, CA 95054. Tel: 408-919-0200, Fax 408/919-0201, or e-mail us at sales@linengineering.com and say, "I saw it in MotionShop.com" or visit our Web site at http://www.linengineering.com.

Add Your Product/Company | Need a Website? | Need a Product Release?
info@motionshop.com

"MotionShop.com" and "The Motion Control Home Page" are trademarks of E-Media Publishing. Other product and company names are trademarks or registered trademarks of their respective holders.

Keyword Search: