 |
| Maxon Ready-To-Use Speed Controller For Brushless DC Motors
With its input voltage ranging from 5 – 24 V, the DEC 24/3 can be used flexibly with various voltage sources, allowing operation as a digital speed controller and open loop speed controller. The required operating mode can be quickly and easily selected using a DIP switch. The speed value can be set via an integrated potentiometer or external reference value. The DEC 24/3 boasts an excellent control action thanks to digital signal processing. The controller offers additional setting options, with control inputs available for selecting motor direction, disable and braking. The required maximum power is set using a potentiometer. In continuous operation, the output current should reach 3A, and 100% overload is permissible for intermittent acceleration. The robust controller design means that it can be easily and quickly put into operation. The DEC 24/3’s end stage is protected several times over. Under-voltage protection prevents uncontrolled operation, and blocking protection stops the motor current from going below the minimum speed by more than 1.5 seconds. An LED indicator clearly shows the motor’s error functions or missing connections. The compact board is a cost-optimized solution for direct installation in all types of drive systems and requires very little space, even when used with flat motors where space is often limited. For a free catalog use our Catalog Hyper-link above. To speak with our engineering staff call 1-800-865-7540, Fax: 508-677-0530, or email: info@maxonmotorusa.com and say "I saw it in MotionShop.com", or go to our Web site at: http://www.maxonmotorusa.com. Add Your Product/Company | Need a Website? | Need a Product Release? info@motionshop.com "MotionShop.com" and "The Motion Control Home Page" are trademarks of E-Media Publishing. Other product and company names are trademarks or registered trademarks of their respective holders. Copyright © 2008 E-Media Publishing |
|
Keyword Search: 
   |