Fall River, MA --Maxon's new EPOS 24/5 is a digital motion controller capable of position, velocity, and current mode. The small package size and cost-efficient design makes the EPOS 24/5 an ideal choice for controlling small brush or brushless motors. Dimensions are 105 X 83 X 24 mm (4.2 X 3.3 X .9 in) and weight is 170 g (6 oz). Communication is via RS-232 or CANopen. Software for CANopen and Windows DLL's is complimentary.

Requiring a supply voltage of 11-24 V DC, the controller is capable of 5 A max continuous current and 10 A peak current. Efficiency is up to 90%. The 50 kHz switching frequency and built-in choke insures compatibility with most low inductance motors, while the sinusoidal commutation for brushless motors insures minimal torque ripple and low noise. Maximum motor speed is 25,000 rpm for 2-pole motors. A maximum encoder input frequency of 1 MHz, six digital inputs, four digital outputs, and two analog inputs allows for maximum flexibility.

Due to its high efficiency and small size, the EPOS 24/5 is suitable for a variety of applications including test & measurement equipment, pick and place machines, motorized stages, optics, pumps, medical imaging, robotics and manufacturing.

Maxon designs, manufactures, and markets fractional horsepower moving coil DC motors & brushless motors ranging in size from 6 to 90 mm (0.2 to 3.5 in) and from 0.03 to 500 watts. We also have an extensive selection of gearheads, encoders, and control electronics to complement our motors.

For a free catalog use our Catalog Hyper-link above. To speak with our engineering staff call 1-800-865-7540, Fax: 508-677-0530, or email: info@maxonmotorusa.com and say "I saw it in MotionShop.com", or go to our Web site at: http://www.maxonmotorusa.com.

"MotionShop.com" and "The Motion Control Home Page" are trademarks of E-Media Publishing. Other product and company names are trademarks or registered trademarks of their respective holders.

Copyright © 2008 E-Media Publishing